System Hardware Requirements
System Software Requirements
Both the Software Development Kit (SDK) release and the Runtime release of NonStop DOM run on any Tandem NonStop system using RISC technology. The system must be running the Tandem NonStop Kernel version D42 or later or the G05 S-series system or later. If you intend to use C++ exceptions, we strongly recommend that you use a D46 or G06 version of the operating system.
In addition to this hardware, your system should also have roughly 20 megabytes of disk storage available for the installation of either the SDK or the Runtime version of NonStop DOM.
Each release of NonStop DOM 2.0 (the SDK and the Runtime release) contains three editions of the software package. They are:
In addition to the above-mentioned hardware and software, Table 1 describes the additional system software you must have installed on your Tandem NonStop Kernel system before you can install NonStop DOM:
| Software Product | Required/Optional | Notes |
|---|---|---|
| OSS (Open System Services) | Required | Required for application execution in NonStop DOM 2.0 |
| NonStop TS/MP (Pathway) | Required | Required for server pools and autorestart. Required by the OTS add-on package. Recommended for application development. |
| NonStop TM/MP | Required | Recommended for NonStop DOM operation but not required for startup |
| NonStop Server for Java | Required | Required for IDL compiler |
| Rogue Wave Tools.h++ | Required | Standard library package |
| Tandem TCP/IP | Optional | Required by IIOP for remote connections |
| X25AM | Optional | Needed by IIOP for wide area network connections |
| TLAM/QIO | Optional | Required by IIOP for local area network connections |